YAMAHA 6H1-14301-07-00 Outboard Motor Carburetors Carb Set 4-STROKE

( Manufacturer Part Number: 6H1-14301-07-00 ), ( Part Type: Hp Motor Carburetor ), ( Warranty: 30 Day ), ( Country Of Origin: United States )

Review YAMAHA Hp 4-stroke Outboard Motor Carbs Carburetors Carb Set 6h1-14301-07 fits 1975–1990

The **Yamaha 6H1-14301-07 75 90 HP 4-Stroke Outboard Carburetor Set** is a precision-engineered replacement component designed exclusively for Yamaha s high-performance 6H1 series outboard motors, specifically tailored for models operating within the 75 to 90 horsepower range. This meticulously crafted carburetor assembly serves as the heart of the engine s fuel delivery system, ensuring optimal combustion, smooth operation, and peak performance across a variety of marine applications, from sportfishing to cruising and high-speed recreational boating. Built to Yamaha s exacting standards, this carb set features a robust **single-carburetor design** (or dual-carb configuration, depending on the specific engine variant) with a **fuel-injected pre-mix system** that enhances throttle response and fuel efficiency while minimizing emissions. The carburetor incorporates a **precision-bored intake manifold** and **high-flow passages**, allowing for unrestricted airflow and consistent fuel-air mixture regulation, even under demanding conditions such as rapid acceleration, high RPMs, or variable load scenarios. Constructed from durable **aluminum alloy** and reinforced with heat-resistant components, this carburetor set is engineered to withstand the rigors of saltwater corrosion, thermal cycling, and prolonged use, ensuring longevity and reliability in both freshwater and marine environments. The **adjustable throttle body** and **idle mixture screws** allow for fine-tuning to match the engine s specific requirements, whether for stock performance or aftermarket modifications, while the **sealed gaskets and O-rings** prevent fuel leaks and maintain vacuum integrity. Whether replacing a worn-out original carburetor or upgrading an older engine for improved performance, this Yamaha 6H1-14301-07 carb set delivers the precision, durability, and efficiency expected from one of the most trusted names in marine propulsion. Proper installation and periodic maintenance including carburetor cleaning, jet adjustments, and fuel system checks will ensure this component continues to deliver flawless operation, keeping your outboard motor running at its best for years to come.

### **Pros and Cons of buying a Yamaha 6H1-14301-07 (75 90 HP 4-Stroke Outboard Motor with Carburetor Set)**

1. **Reliable Brand Reputation** Yamaha is a well-established manufacturer known for durable, high-quality outboard motors. Their 4-stroke engines are particularly praised for smooth operation and longevity.

2. **Proven Performance** The 6H1 series is a mid-sized outboard designed for fishing boats, small cruisers, and utility vessels. It delivers consistent power (75 90 HP) suitable for moderate-sized boats (typically 16 20 feet).

3. **Fuel Efficiency** As a 4-stroke, it offers better fuel economy compared to 2-strokes, reducing operating costs over time.

4. **Lower Maintenance Than 2-Strokes** Fewer moving parts mean less wear and fewer oil changes (though still requires regular upkeep).

5. **Quieter Operation** 4-stroke outboards are significantly quieter than their 2-stroke counterparts, making them ideal for fishing or recreational use where noise is a concern.

6. **Easier to Service** The carburetor setup (though older) is simpler to adjust and maintain compared to modern fuel-injected engines, which can be more complex.

7. **Good for Secondary Boats** If you already own a Yamaha outboard, this carburetor set is a cost-effective way to restore or upgrade an older engine without investing in a new one.

8. **Resale Value** Yamaha 4-strokes hold their value better than many other brands, especially if well-maintained.

---

1. **Outdated Technology** This carbureted model is from an older generation (likely pre-2010s). Modern outboards use electronic fuel injection (EFI), which offers better performance, fuel efficiency, and emissions compliance.

2. **Higher Fuel Consumption Than Newer Models** Carbureted engines are less efficient than fuel-injected ones, meaning you ll burn more gas over time.

3. **Emissions Regulations** Many regions have phased out older carbureted engines due to stricter emissions standards. You may face restrictions or higher inspection costs in some areas.

4. **Limited Availability of Parts** While Yamaha parts are still available, finding exact replacements (especially for carburetor components) can be harder than for newer models.

5. **Potential for Tuning Issues** Carburetors require precise adjustments, and improper tuning can lead to poor performance, rough idling, or excessive fuel consumption.

6. **No Electronic Diagnostics** Unlike modern EFI engines, you can t easily troubleshoot issues with an onboard computer. Diagnosing problems may require more guesswork.

7. **Resale Depreciation** While Yamaha holds value, an older carbureted model will depreciate faster than a newer fuel-injected equivalent.

8. **Higher Maintenance Over Time** Carburetors can clog, leak, or require frequent cleaning, whereas EFI systems are generally more reliable long-term.

---

The **Yamaha 6H1-14301-07 carburetor set** is a solid choice if you need a **budget-friendly, mid-power outboard for a secondary boat** or are restoring an older Yamaha engine. It offers **reliability, simplicity, and good performance** for its class, especially if you re already familiar with carbureted systems.

However, if you re looking for **long-term efficiency, lower emissions compliance, or modern convenience**, a **new or used fuel-injected Yamaha outboard** (such as the newer 6F, 9F, or 11F series) would be a better investment. The carburetor set is best suited for **fishing boats, older rigs, or those who prioritize cost savings over cutting-edge technology**.

- You need a **low-cost replacement carburetor set** for a Yamaha 6H1 engine.

- You re working with an **older boat** where modern upgrades aren t practical.

- You re comfortable with **basic carburetor tuning and maintenance**.

- You re in a **region with lenient emissions laws** or don t plan to use the boat frequently in regulated waters.

- You want **maximum fuel efficiency and longevity** consider a newer EFI model.

- You re in an area with **strict emissions regulations** that may penalize older carbureted engines.

- You prefer **easier troubleshooting and fewer maintenance headaches**.

- You re buying for a **primary boat** where reliability and performance are critical.

For most **primary boat owners**, upgrading to a **fuel-injected Yamaha outboard** (even a used one) would be the smarter long-term choice. However, if you re on a tight budget or restoring a classic rig, this carburetor set remains a practical option.

Details:

It is recommended they are checked out by a mechanic before installing. SHIPPING: I can package and ship via UPS Ground within the Continental US ONLY for $19. Yamaha 75/90hp Carb Set with Primer as pictured. 1992 2000 but please do your research to insure they fit application.

Excellent cosmetic and physical condition.

part #: 6h1143010700 prices

• $175.00-$275.00

specifications jetskiintakeez:

• for makes: Yamaha
• for years: 1975-1990
• mpn: 6h1-14301-07-00
• part type: Hp Motor Carburetor
• warranty: 30 Day
• country of origin: United States

payments jetskiintakeez:

• credit card: Visa
• wallet: Apple-pay
• other

returns jetskiintakeez:

• policy: Returns Accepted
• paid by: Buyer
• time: 30 Days

offer jetskiintakeez:

• started: April 18, 2026
• options: Ship-to-home
• quantity: 1
• availability: In Stock
• sold: 0
• best offers: True

shipping jetskiintakeez:

• service: UPS Ground
• class: Standard
• transit: 5-11 Days
• carrier: UPS
• type: Fixed
• cost: $19.00

general jetskiintakeez:

• condition: Used
• Parts Accessories > Personal Watercraft Parts > Intake Fuel Systems

seller jetskiintakeez:

• city: Gulfport, Mississippi
• # reviews: 393
• rating: 97.8%

Yamaha 6H1-14301-07-00 Is Similar To:

• 006-438 Wsm Seadoo Yamaha Pwc Jet Ski Mikuni Carb 685867147565 (25.5% similar) Ak, pr, hi for ship quote prior to buying...(March 16th, 2018)
• 006-446 Wsm Seadoo Yamaha Pwc Jet Ski Mikuni Carb 685867147589 (25.5% similar) Ak, pr, hi for ship quote prior to buying. Unique, marketing, and strategy consulting from as was...(September 15th, 2018)
• 006-504 Tripple Wsm Polaris Kit Carbs Kawisaki Primer Yamaha Seadoo (30.7% similar) Here's a brand new Sm triple primer kit thanks...(January 1st, 2015)
• 008-683 Wsm Yamaha 1200r Carb (25.8% similar) Oversized and hazardous items typically ship by truck can have substantial shipping costs. It must also be in the original packaging. Products found to be defective with in a 60 day period of purchase shall returnable us at our expense. O-ring yamaha 1200R carb. Yamaha 1200R carb...(November 22nd, 2017)
• 01-02-516 Blowsion Jetworks Tripple Carb Support Fuel Rail Yamaha Wave Runner (29.1% similar) In stock and ready to ship. The carburetor rail connector turns three individual aftermarket miking SVN carburetors including black jacks Nov, full spectrum's, etc. This networks fuel rail is made of solid billet aluminum and anodized black in color. This helps prevent damage from vibrations and ...(February 13th, 2019)
• Kit 16046 Mukini Spr Carburetors Doo Sbn38 Polaris 44 Sea Yamaha (32.7% similar) Your satisfaction is our 1 importance. Free shipping costs apply only to the USA lower 48 states...(October 10th, 2014)
• 1lj-83310-20 Yamaha Waverunner Reed Set Outboard Motor (30.9% similar) New product, package has wear due to being stored. I will answer the best can...(February 15th, 2019)
• Super Inlet Raider 700 760 Prices Venture 2014 Yamaha 1994 Pipe Jet Blaster Carb Wave (26.4% similar) Carb inlet tube of a 97 yamaha wave venture 760 in great shape...(October 12th, 2014)
• 202-00110 701 700 Racing Yamaha Flow Pro Mount Buckshot Carb (25.8% similar) The mounting is for buckshot carbs on a manifold. Gives better air flow and performance. Here is a 2 tall 9 long and wide filter...(August 11th, 2014)
• 35-180y Sbt Mikuni Yamaha Series Carb Rebuild Kit (26.4% similar) Includes all internal gaskets, diaphragms, o-rings and check valves. Carb rebuild kit for yamaha miking SVN-i series carburetors. APPLICATIONS: 1998 yamaha GP800 miking SVN-i carburetor rebuild kit 1999 2000 1998 XL800 2001 GP800R 2002 2003 2004 2005 XLT 800 XL 1200 GP1200R XR1800. ...(September 12th, 2018)
• Intake Superjet 64x Engine Riva 44-48mm Dual Carb 701 62t Manifold Yamaha (19% similar) This Rivas manifold is the wider 118MM spread. Bolt and stud mounting kit included. Direct mount not sub plate model manifold was used when I got it. Straight port, as they did have a smaller offset spread one as well has throttle cable mounting bosses for both forward and reverse mount carbs. Will ...(January 29th, 2015)